Skip to content
Castlemore Lock & Key Co.Request a visit
Open 24/7(289) 901-5802Call now
Detached horizontal exit device and separate strike component on a workshop bench. — Panic & Exit Hardware, Brampton

Plan ahead Commercial · Brampton

Panic & Exit Hardware in Brampton

Someone at the front counter always has to unlock the side door by hand before the lunch rush, because the round doorknob out there was never meant to be an exit for a room this size.

Call now · open 24/7(289) 901-5802

Request a visit

In plain words

A tenant fit-out is a common point to bring exit hardware into a space for the first time. As walls move and a room's intended use becomes clear, the doors serving it get measured against that use: occupancy, fire rating, width and whether the space now qualifies as an assembly occupancy. Specifying and fitting the hardware alongside the rest of the fit-out, rather than after an inspector flags it, keeps the schedule intact and gives the space a documented exit from the day it opens.

Sound familiar?

The new access-control reader at the staff entrance works fine going in, but nobody has sorted out the door's exit side, and right now a card reader and a pushbar exist as two separate ideas.

How the visit goes

Panic & Exit Hardware · Brampton

How the visit goes

Hands fitting a steel door knob into the bore of a dark door, with a yellow drill and tool bag behind. — Brampton
  1. 1

    Confirming why the door needs this hardware

    The visit starts with the reason exit hardware is being discussed at all: an occupant load that has crossed a threshold, a fire inspector's note, a new use for the room, or an existing device that has stopped working the way it should. Confirming this first decides everything downstream, because a door required to have a releasing device is treated differently from one where an owner simply wants easier egress. Whoever is responsible for the building is asked directly what triggered the visit, and the answer is recorded alongside the door it concerns before any hardware is chosen.

  2. 2

    Mounting the device and fitting the strike

    Installation follows the device's own template so every hole lands where the manufacturer intended, rather than adapting the door to a device that does not quite fit. Fasteners are chosen to match what the template and the door's own construction call for, and where the device specifies through-fixings, they run all the way through the door rather than biting into the surface alone. The strike is set and reinforced so it holds the latch securely under normal use. The crossbar or touchpad is aligned so it sits at a comfortable height and releases evenly across its width, not only at one end.

  3. 3

    Electrified functions folded into the building's other systems

    Any request-to-exit signal, latch retraction or alarm added during the visit now does its own specific job rather than one combined function: an alarm module can sound locally on its own power the moment the crossbar is used, latch retraction lets an authorized signal release the latch for entry, and a request-to-exit signal tells the access-control panel that the pushpad was actuated. None of them alone proves who passed through or from which side, and the exit function itself remains entirely mechanical underneath, so a power interruption still leaves the door able to be pushed open by hand from the inside.

In the van

  • Astragal and mullion hardware
  • Rated exit device
  • Dogging key or keyed cylinder
  • Coordinator for door pairs
  • Request-to-exit switch

What affects the quote

  1. 1

    Weatherproofing for an exterior opening

    An exterior device, strike and trim built to handle temperature swings and moisture cost more as hardware than an equivalent interior-only set, and the quote reflects that difference in the parts themselves.

  2. 2

    Fire-rated versus non-rated opening

    A fire-rated door needs hardware specifically listed for that assembly and installed to keep the rating intact, which is more involved than fitting a standard device to a non-rated door.

  3. 3

    Condition of the existing hardware

    A device that only needs adjustment, cleaning and new fasteners costs less in labour than removing a seized or badly worn device and fitting a replacement in its place.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 901-5802

Panic & Exit Hardware: questions

Advice · (289) 901-5802

What should I have ready before the visit?

Knowing the intended use of the room, roughly how many people it holds, whether any doors are already fire-rated, and whether any of them are part of a pair helps the locksmith bring the right devices. If a fire inspector or building official has already given a note about the opening, having that note or its reference number on hand keeps the visit focused on what was actually flagged.

Can I still lock the door from outside?

Yes. The releasing device only governs the inside of the door; the outside gets its own trim, a pull, a lever with a cylinder, or a keyed cylinder alone, chosen for how that door is entered. Locking or unlocking that outside trim has no effect on the inside crossbar, which always releases the latch under a push, so entry security and exit function are handled as two separate questions.

Can the door be alarmed without making it hard to open?

Yes. An exit alarm module sounds when the device is used, which tells staff a door meant to stay closed has been opened, but it does not add any resistance to the push that releases the latch. The alarm is a notification layer on top of hardware that still opens under one motion, which is why it suits stockroom, dock or perimeter doors where entry through that opening should be rare.

Panic & Exit Hardware near you

Peel, Ontario

Brampton information

Town
Brampton, Peel, Ontario
In business
15 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

23%

Newer homes. About 23% of homes in Brampton were built in 1980 or earlier, according to the 2021 Census.

Where most homes are recent, the doors themselves are sound and the work is mostly about keys and control: who holds them, whether contractor keys were retired, and whether one key can open everything. The visit is often more conversation than drilling.

53%

A mix of homes. Single-detached houses make up about 53% of homes in Brampton (2021 Census).

In an area with both houses and attached homes, the work varies by the door. A detached house wants all its exterior doors on one key; a suite door wants a cylinder that suits a metal frame and respects building rules. A locksmith carries parts for both.

Source: Statistics Canada, 2021 Census of Population

Open Brampton in Google Maps

Open 24/7

Request a visit

Someone at the front counter always has to unlock the side door by hand before the lunch rush, because the round doorknob out there was never meant to be an exit for a room this size.

Call now · open 24/7(289) 901-5802
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 15 years in business